How to Properly Clean a Pool Filter
A pool filter is one of the essential components of a pool. Pool filters are responsible for trapping dirt particles from the pool. Thus, they keep pool water clean. It is vital to keep the pool filter clean at all times to boost its efficiency. So, how do you clean a pool filter?
First, it is essential to note that there are different types of filters. Each of them incorporates different cleaning procedures. Follow all cleaning guidelines as directed by the manufacturer. This way, you’ll prolong the durability of the filter.
How do you clean a cartridge pool filter?
Cartridge filters are relatively easy to clean. All you need to do is remove the cartridge from the filter. Then, clean it or replace it; it all depends on what you want. Below are the steps involved in cleaning a cartridge filter.
- The first thing to do is to switch off the pool pump and filter. Doing this helps you avoid electrocutions during the process.
- Next, switch on the air relief valve to remove all present air in the pool filter system. You can find the air relief valve at the top of the filter.
- Follow the manufacturer’s instructions as you remove the filter clamps. Then, disconnect the filter from its lid/top section.
- Afterward, pull out the cartridge and place it in a safe place; do this carefully to avoid damaging it. Examine the cartridge to ensure it’s in good condition and start cleaning it. If you notice you have a damaged filter, consider replacing it.
- Spray water across the cartridge using a nozzle. Alternatively, use a filter cleaner, especially if your filter is very dirty. Consider soaking the cartridge filter in the filter cleaner for approximately 12 hours. At this time, check the O-ring on the filter tank and apply lubricant to minimize friction.
- Once you complete washing the cartridge, use clean water to rinse it. Let it dry before placing it back in the filter.
- Fix the cartridge back on the filter. Use the necessary clamps to ensure it’s firmly held in place. Switch on the air relief valves and let the system start running.
- Before you leave the filter, ensure it has a standard PSI.
How to clean a sand pool filter
Sand filters are slightly more conventional compared to cartridge filters. Consequently, they incorporate a more detailed cleaning procedure. Let’s look at all the steps involved in cleaning a sand pool filter.
- When cleaning a sand pool filter, the first thing you need to do is backwash the filter. Backwashing the filter involves reversing the water flow to remove the build-up of dirt particles on the cartridge. Backwash the filter for approximately three to five minutes.
- After backwashing the filter, switch off the pump and switch the valve to filter.
- Take the strainer lid off from the pump.
- Insert a quality sand filter cleaner into the strainer basket. Then, cover it with another lid.
- Switch on the pump for approximately 15 seconds. Doing this helps you facilitate a smooth transfer of the cleaner to the filter from the pump.
- Next, switch off the pool pump. Do not turn it on for approximately eight hours; it would be best to leave the pump overnight.
- In the morning, conduct another backwash to get rid of all remaining dirt particles in the pool.
- The last step would be to switch on the filter again.
How to clean a D.E. pool filter
If you have a D.E pool filter, follow the below steps to clean it.
- First, get rid of all accumulated dirt particles from the pool through backwashing.
- Afterward, switch off the pool pump.
- The next thing to do is to turn on the air relief valve.
- Drain water from the pool filter by getting rid of the drain plug.
- Follow all instructions from the manual to remove all components used to knit the pool filter.
- Then, pull out the grids and the manifold.
- Use a spray nozzle or garden hose to rinse the filter tank, manifold, and grids. Always use a quality filter cleaner to clean a filthy pool filter. At times, you may have to soak the manifold in the muriatic acid solution for approximately 12 hours.
- When you are done washing the filter tank and its components, use clean water to rinse all these parts. Leave them to dry and place them back to the filter.
Cleaning a pool filter is essential in maintaining crystal clear pool water. Therefore, you need to follow all the right steps if you plan to clean a pool filter. However, it would be best to identify the specific type of filter before cleaning it. Also, consider hiring pool professionals to clean a pool filter. Here at Fox Pools, we have the best pool experts who help you clean a pool filter. As a result, we help you boost the durability and efficiency of your filter.